computer network - networking devices

In this topic we are going to learn about networking devices. Networking devices are really important in today's network and internetwork because it found every ware.

We’ll start by covering the more common network devices that you would be most likely to come across and then move on to discuss some of the more specialized devices that you may or may not always Find running in a network.

Common Network Connectivity Devices:

it’s time to lean about some of the devices they catch up to that are commonly found on today’s networks. First we will learn the basic terms; then, later we will see how these devices actually work and the terminology associated with them.

Because these devices connect network entities, they’re known as connectivity devices.

Here’s a list of the devices I’ll be covering in this chapter:

  • Network interface card (NIC)
  • Hub
  • Bridge
  • Basic switch
  • Basic router
  • Basic firewall
  • IDS/IPS/HIDS
  • Access point

Network Interface Card:

A network interface card (NIC) is installed in your computer to connect, or interface your computer to the network. It provides the physical, electrical, and electronic connections to the network media.

A NIC either is an expansion card or is built right into the computer’s motherboard. Today, almost all NICs are built into the computer motherboard providing 10, 100, and 1000 Mbits/sec, but there was a time when all NICs were expansion cards that plugged into motherboard expansion slots. In some notebook computers, NIC adapters can be connected to the USB port or through a PC card slot.

NIC Card

Nowadays, most PCs and laptops of all types come with an Ethernet and Wireless Connector built into the motherboard, so you usually don’t need a separate card. It’s rare to find a laptop today without a built-in wireless network card, but you can buy external wireless cards for desktops and laptops

Hub:

A hub is the device that connects all the segments of the network together in a star topology Ethernet network. Each device in the network connects directly to the hub through a single cable and is used to connect multiple devices without segmenting a network. Any transmission received on one port will be sent out all the other ports in the hub, including the receiving pair for the transmitting device, so that Carrier Sense Multiple Access with Collision Detection (CSMA/CD) on the transmitter can monitor for collisions.

Network Hub

Bridge:

Bridge is a network device that connects two similar network segments together. Its primary function is to keep traffic separated on either side of the bridge, breaking up collision domains.

Network Bridge

The main reasons you would place a bridge in your network wou1d be to connect two segments together or to divide a busy network in two segment.

Switch:

Switches connect multiple segments of a network together much like hubs do, but with three significant differences- a switch recognizes frames and pays attention to the source and destination MAC address of the incoming frame as well as the port on which it was received. A switch makes each of its ports a unique, singular collision domain. Hubs don’t do those things. They simply send anything they receive on one port out to all the others.

Network Switch

Router:

A router is a network device used to connect many, network segments together, combining them into what we call an internetwork. A well-configured router can make intelligent decisions about the best way to get network data to its destination. It gathers the information it needs to make these decisions based on a network’s particular performance data.

Network Router

Firewall:

Firewalls are your network’s security guards. A firewall protects your LAN resources from invaders that stalk the Internet for unprotected networks while simultaneously preventing all or some of your LAN’s computers from accessing certain services on the Internet. You can employ them to filter packets based on rules that you or the network administrator create and configure to strictly delimit the type of information allowed to flow in and out of the network’s Internet connection.

A firewall can be either a stand-alone “black box” or a software implementation placed on a server or router. Either way, the firewall will have at least two network connections: one to the Internet (known as the public side) and one to the network (known as the private side).

Network Firewall

IDS/IPS:

Intrusion detection systems (IDSs) and intrusion prevention systems (IPSs) are very important in today’s networks. They are network security appliances that monitor networks and packets for malicious activity. An IDS is considered monitor mode and

just records and tells you about problems, whereas an IPS can work in real time to stop threats as they occur.

The main difference between them is that an IPS works inline to actively prevent and block intrusions that are detected based on the rules you set up. IPSs can send an alarm, create correlation rules and remediation, drop malicious packets, provide malware protection, and reset the connection of offending source hosts.

HIDS:

In a host-based IDS (HIDS), software runs on one computer to detect abnormalities on that system alone by monitoring applications, system logs, and event logs not by directly monitoring network traffic.

Access Point:

AP is just a hub that accepts wireless clients via an analog wireless signal.

Access Point